User's Manual

Indoor Mobility Point™ Quick Start Guide
24
Trapeze Networks
Figure 1–26. Step 8—Cable Placement
10.Lock the MP access point onto the bracket by inserting a small-pointed instrument or a paperclip
into the Lock hole on the MP as shown in Figure 1–27.
Figure 1–27. Step 9—Locking the Bracket
11.To ensure that the MP access point is fully locked onto the bracket, gently pull on the access point
and attempt to rotate it from side to side.
If the access point comes off the bracket, relock the device onto the bracket as described in step 10
on page 24.
W arning!
To prevent possible damage to the MP, make sure the device is fully locked onto the
bracket before releasing it.
Universal mounting bracket
Cable
Lock