User's Manual

Indoor Mobility Point™ Quick Start Guide
18
Trapeze Networks
Figure 1–17. Step 9—Placing the MP Access Point on the Bracket
11.Lock the MP access point onto the bracket by inserting a small-pointed instrument or a paperclip
into the Lock hole on the MP as shown in Figure 1–18.
Figure 1–18. Step 10—Locking the Bracket
12.To ensure that the MP access point is fully locked onto the bracket, gently pull down on the access
point and attempt to rotate it from side to side.
If the access point comes off the bracket, relock the device onto the bracket.
13.If the MP requires an external antenna, install and connect the antenna. (See “Connecting an MP
to an External Antenna” .)
W arning!
To prevent possible damage to the MP, make sure the device is fully locked onto the
bracket before releasing it.
Lock