User's Manual

External Hardware Features
Chapter 2
MP Overview
13
Table 2. MP Access Point LEDs—MP-422
LED Appearance Meaning
Health Solid green All the following are true:
• Management link with an MX switch is
operational.
• MP access point has booted.
• MP access point has received a valid
configuration from an MX switch.
• At least one radio is enabled or is in sentry
mode.
Solid amber MP access point is waiting to receive boot
instructions and a configuration file from an MX
switch.
Alternating green and
amber
MP access point is booting and receiving its
configuration file from an MX switch.
After the MP boots and receives its
configuration, this LED appearance persists until
a radio is enabled or is placed in sentry mode.
Radio 1
Radio 2
Solid green A client is associated with the radio.
Blinking green Associated client is sending or receiving traffic.
Blinking amber Non-associated client is sending or receiving
traffic.
Alternating green and
amber
Radio is unable to transmit. This state can occur
due to any of the following:
• Excessive radio interference in the
environment is preventing the radio from
sending beacons.
• DFS has detected radar and is holding down
traffic.
• The radio has failed.
Unlit Means one of the following:
• Radio is disabled and active scan is enabled.
(The radio is in sentry mode.)
• Radio is enabled, but no clients are associated
with it.