User's Manual
Table Of Contents
- Customer Service
- Introducing the Trapeze Networks Mobility System
- MP Overview
- Installing and Connecting an MP-372
- MP Troubleshooting
- MP Technical Specifications
- Translated Warning Conventions and Warnings
- Index
MP Troubleshooting
53
A
MP Troubleshooting
After you insert a Cat 5 cable into an MP access point’s port connector and enable
PoE on the cable, observe the device’s health or LINK LED to determine the
status of the connection with the MX switch.
● If the LED is green and is glowing steadily, the MP has been booted
successfully by the MX switch and is ready for operation.
● If the LED is not steadily glowing green, see Table 5.
(For descriptions of all the LEDs, see “Status LEDs” on page 12.)