User's Manual
Table Of Contents
- Customer Service
- Introducing the Trapeze Networks Mobility System
- MP Overview
- Installing and Connecting an MP-372
- MP Troubleshooting
- MP Technical Specifications
- Translated Warning Conventions and Warnings
- Index
Installing an MP-372
Chapter 3
Installing and Connecting an MP-372
37
Figure 23. Step 2—Removing the Bracket
3 Attach the universal mounting bracket to the junction box as shown in
Figure 24:
a Place the universal mounting bracket against the junction box so that the
two screw holes face the junction box and align over the screw holes in
the box.
b Insert the #6-32 x 1-inch machine screws in the universal mounting
bracket’s screw holes, and use a #2 Phillips-head screwdriver to tighten
them.
840-9502-0008