User's Manual

Installing an MP-372
Chapter 3
Trapeze Mobility Point Installation Guide
36
Junction Box Installation
(For required mounting hardware and tools, see Table 4 on page 22.)
1 Unlock the universal mounting bracket from the MP access point by inserting
the 3-mm or 1/8-inch screwdriver into the Unlock hole on the MP access point
as shown in Figure 22.
Figure 22. Step 1—Unlocking the Bracket
2 Remove the bracket as shown in Figure 23.
Caution! To avoid damage to the MP access point’s lock mechanism
or electronic components, do not use excessive force when inserting a
tool into the Unlock or Lock hole.
840-9502-0011