User's Manual
Table Of Contents
- Customer Service
- Introducing the Trapeze Networks Mobility System
- MP Overview
- Installing and Connecting an MP-372
- MP Troubleshooting
- MP Technical Specifications
- Translated Warning Conventions and Warnings
- Index
External Hardware Features
Chapter 2
Trapeze Mobility Point Installation Guide
12
Kensington Security Slot
Models MP-372 has a slot for attachment of a Kensington security cable. The
cable is not included with the MP but can be ordered separately.
MP Mounting Options
You can mount an MP access point on any of the following types of surfaces:
● Suspended T-bar ceiling
● Junction box
● Solid surface wall or ceiling
● Tabletop
Status LEDs
The MP has LEDs that provide status information for the device. Figure 4 shows
the locations of the LEDs. Table 2 describes the LEDs.
Figure 4. Health and Radio LEDs—MP-372
Note. The solid surface mounting option requires Cat 5 cable that does not
have strain relief. The other mounting options can use Cat 5 cable with or
without strain relief.
Radio 2 LED
Health LED
Radio 1 LED
840-9502-0010