User Manual Part 1

Installation Requirements and Recommendations
Chapter 2
MP-71 Overview
9
Installation Requirements and
Recommendations
For best results, follow these requirements and recommendations before installing
an MP-71 access point.
RingMaster Network Plan and Work Orders
If you are using RingMaster to plan your Trapeze Networks Mobility System
installation, you might want to create and verify a network plan for the entire
Trapeze network installation and generate an MP work order, before installing MP
access points. A network plan and the MP work orders generated from it provide
the following information about MP access point installation and configuration:
● Number of MP access points required for adequate WLAN capacity in each
coverage area
● Detailed installation location for each MP access point
● Settings for all MP access points in the WLAN
(For information about installing RingMaster, creating and verifying a network
plan, and generating an MP work order, see the Trapeze RingMaster User’s Guide
and Trapeze RingMaster Reference Manual.)
Table 1. LED Descriptions
Status 802.11b/g Netword Power
On Link is activated. Link is activated. Power
Off No wireless connection No LAN connection No Power
Blinking Transmit/Receive Data Transmit/Receive Data N/A