User's Manual

MP Technical Specifications
57
Confidential—Beta Draft—Confidential—Beta Draft—12 May 04
B
MP Technical Specifications
This appendix lists the technical specifications for the Trapeze Networks MP
access point. Table 7 lists the mechanical and compliance specifications. Unless
otherwise noted, the values apply to all currently shipping MP models. (For
detailed compliance information, see the Trapeze Regulatory Information
document.) Table 8, Table 9, and Table 10 list the radio specifications. Table 11
lists the MAC address allocation schemes for MPs.
(For specifications for the MX switch, see the Trapeze Mobility Exchange
Installation and Basic Configuration Guide.)
Note. This Listed Accessory is designed and approved to be used only with
Trapeze Networks Mobility Exchange (MX) models MX-20 and MX-8. (The
MX-400 switch does not directly connect to the MP.)
Note. The MP access point radios are disabled by default and can be enabled
only by the system administrator using the RingMaster management application
or the MX switch’s command-line interface (CLI).
Note. The radio frequency band, operating channels, and transmit power
depend on the country of operation specified by the system administrator using
RingMaster or the MX switch’s CLI.