User's Manual

MP Troubleshooting
53
Confidential—Beta Draft—Confidential—Beta Draft—12 May 04
A
MP Troubleshooting
After you insert a Cat 5 cable into an MP access point’s port connector and enable
PoE on the cable, observe the device’s health LED to determine the status of the
connection with the MX switch.
If the health LED is green and is glowing steadily, the MP has been booted
successfully by the MX switch and is ready for operation.
If the health LED is not steadily glowing green, see Table 6.
(For descriptions of all the LEDs, see “Status LEDs” on page 11.)