User's Manual

Installing an MP—Model MP-241, MP-252, and MP-262
Chapter 3
Trapeze Mobility Point Installation Guide
Version 2.1
40
Confidential—Beta Draft—Confidential—Beta Draft—12 May 04
c Remove the screw from each anchor and save the screw(s) for step 6 on
page 41.
3 Unlock the universal mounting bracket from the MP access point by inserting
the 3-mm or 1/8-inch screwdriver into the Unlock hole on the MP access point
as shown in Figure 27.
Figure 27. Step 3—Unlocking the Bracket
4 Remove the bracket as shown in Figure 28.
Caution! To avoid damage to the MP access point’s lock mechanism
or electronic components, do not use excessive force when inserting a
tool into the Unlock or Lock hole.
840-9502-0011