User's Manual
Table Of Contents
- Customer Service
- Introducing the Trapeze Networks Mobility System
- MP Overview
- Installing and Connecting an MP
- MP Troubleshooting
- MP Technical Specifications
- Translated Warning Conventions and Warnings
- Index
Installing an MP—Model MP-241, MP-252, and MP-262
Chapter 3
Installing and Connecting an MP
33
Confidential—Beta Draft—Confidential—Beta Draft—12 May 04
Figure 19. Step 6—Top View
Figure 20. Step 6—Bottom View
7 Pull the Cat 5 cable(s) about 15 cm (about 6 inches) out of the hole in the
ceiling tile and through the port connector opening to create enough slack to
insert the cable(s).
8 Insert the Cat 5 cable(s) into the connector(s):
● For a single connection, use the connector for port 1.
● For a dual-homed connection, insert one cable into each connector.
T- bar
T-bar clamps
(attached
to T-bar)
Universal mounting
bracket
840-9502-0012
(Viewed from above ceiling tiles, looking down.)
Port connector
opening
T-bar
Universal mounting bracket
840-9502-0004
Port connector
opening