User's Manual

Installing an MP—Model MP-241, MP-252, and MP-262
Chapter 3
Installing and Connecting an MP
31
Confidential—Beta Draft—Confidential—Beta Draft—12 May 04
Figure 16. Step 3—Installing the T-bar Clamp for a 15.9-mm
(5/8-inch) T-bar
4 Unlock the universal mounting bracket from the MP access point by inserting
the 3-mm or 1/8-inch screwdriver into the Unlock hole on the MP access point
as shown in Figure 17.
Figure 17. Step 4—Unlocking the Bracket
Caution! To avoid damage to the MP access point’s lock mechanism
or electronic components, do not use excessive force when inserting a
tool into the Unlock or Lock hole.
T-bar
T-bar clamp halves
Slide together
840-9502-0066
840-9502-0011