User's Manual

Installing an MP—Model MP-241, MP-252, and MP-262
Chapter 3
Trapeze Mobility Point Installation Guide
Version 2.1
30
Confidential—Beta Draft—Confidential—Beta Draft—12 May 04
c Remove the mounting template and the material you cut from the ceiling
panel.
3 Install the T-bar clamp that fits the T-bar:
a Slide each half of the clamp onto the T-bar so that the clamp lip is fully on
the T-bar.
b Slide the two halves of the clamp toward each other until the tabs are
inserted completely into the holes and the clamp fits snugly on the T-bar.
Figure 15 shows an example for a 23.9-mm (15/16-inch) T-bar. Figure 16
shows an example for a 15.9-mm (5/8-inch) T-bar.
Figure 15. Step 3—Installing the T-bar Clamp for a 23.9-mm
(15/16-inch) T-bar
T-bar
T-bar clamp halves
Slide together
840-9502-0003