User's Manual
Table Of Contents
- Customer Service
- Introducing the Trapeze Networks Mobility System
- MP Overview
- Installing and Connecting an MP
- MP Troubleshooting
- MP Technical Specifications
- Translated Warning Conventions and Warnings
- Index
Installing an MP—Model MP-241, MP-252, and MP-262
Chapter 3
Trapeze Mobility Point Installation Guide
Version 2.1
26
Confidential—Beta Draft—Confidential—Beta Draft—12 May 04
Figure 9. Step 5—Unlocking the Bracket
6 Remove the bracket as shown in Figure 10.
Figure 10. Step 6—Removing the Bracket
7 Install the universal mounting bracket as follows onto the T-bar or T-bar
clamp:
a As shown in Figure 11, place the universal mounting bracket against the
T-bar or clamp so that the two screw holes face downward and the two
T-bar flanges face upward and are adjacent to the T-bar edges.
840-9502-0011
840-9502-0008