User's Manual

Regulatory Compliance Information
Trapeze Regulatory Information
8
Regulatory Compliance Information
Trapeze Networks products cause no electromagnetic interference to other devices if installed and operated
properly and without modification.
Modification Prohibition
The manufacturer, Trapeze Networks, is not responsible for any interference caused by unauthorized
modification of the devices included with this product, or the substitution or attachment of connecting
cables or equipment other than supplied by Trapeze Networks.
The correction of interference caused by such unauthorized modification, substitution, or attachment is
your responsibility.
Trapeze Networks and its authorized resellers or distributors are not liable for any damage or violation of
government regulations that might arise from failure to comply with these guidelines.
Wiring Notice
United States 5150 to 5250 36, 40, 44, 48 50 mW (17 dBm)
5250 to 5350 52, 56, 60, 64 200 mW (23 dBm)
5725 to 5825 149, 153, 157, 161 1000 mW (30 dBm)
2400 to 2483.5 1 to 11 1000 mW (30 dBm)
Caution! The Part 15 radio device in the access point operates on a noninterference basis
with other devices operating at the same frequency. Any modification to this device not
expressly approved by Trapeze Networks can void your authority to operate the device.
Note. Other than the power cord, the wiring interconnecting these units is designed to be
used intra-building only.
Table 1. Permissible Radio Frequencies, Channels, and Maximum Transmit Power
(continued)
Country Frequency Range (MHz) Channels
Maximum Transmit
Power (EIRP)