Owner's manual

Benefit from the advantages
SOLO-PILOT MULTI-PILOT
Superior operator comfort
The ergonomically designed operator’s
cab allows for relaxed operation with low
fatigue, even during long shifts:
• Light and eortless electric hydraulic
steering, reduces the number of
steering wheel turns and provides a
smaller steering wheel.
• The elimination of hydraulic com-
ponents in the leg area reduces noise
and provides more legroom.
• The height and pitch of the steering
column is adjustable.
• All essential controls are located on
the adjustable armrests (adjustable
height and length), making operation
especially comfortable.
• Minimal vibration due to the mounting
of the cabin from the chassis (“Floating
Cab”).
• Clearly arranged operator display.
Professional battery management
3-phase AC technology oers both
improved eciency as well as optimum
energy recovery, thereby ensuring
longer operating times between battery
changes.
• Lateral battery access.
• Individual replacement systems with
pedestrian pallet trucks, fork lifts or
cranes.
• Simple, space-saving charging via side
door.
• Easy access for maintenance.
• Safe horizontal transport.
• Built-in charger with 2 charging cat-
egories for more flexibility and shorter
charging times compared to con-
ventional chargers.
Maintenance-free braking system
Three maintenance-free braking systems
make braking safe and comfortable:
• Motor brake for regenerative braking
during deceleration.
• Automatically engaging parking brake
for secure stopping, even on ramps.
• Brake pedal operated, mainten-
ancefree disc brakes during dangerous
situations.
Maintenance-free motors
The new generation of three-phase AC
motors will impress you with their quiet
and precise operation at all speeds.
• High torque for faster operation cycles.
• Lifetime lubrication of main com-
ponents.
• Individually mounted drive motors for
simpler servicing.
• Dust and water jet protection to IP 54.
Safety systems
Excellent drive dynamics and perform-
ance provide a high degree of safety.
That’s why the EFG Series 3 includes a
comprehensive range of safety equip-
ment:
• Deactivation of the hydraulic functions
if seat is unoccupied.
• No roll-back on ramps or inclines due
to the automatic parking brake, even
when the truck is switched o.
• Automatic reduction of the driving
speed when cornering with Junghein-
rich Curve Control.
• High mounted fully floating axle.
• Speedometer.
A range of operator assistance systems
(optional) provide even more safety for
the operator, the fork lift truck and the
load:
• Access Control: The access control
system unlocks the vehicle only after a
sequence of safety checks:
1. Valid access rights.
2. Closed seat switch.
3. Seatbelt is secured.
• Drive Control: The speed control
which automatically reduces the speed
of travel when cornering and from a
defined lift height.
• Lift Control: The lift speed control
which, in addition to the travel speed
reduction, also automatically reduces
the tilt speed of the mast from a de-
fined lift height. The tilt angle is shown
on a separate display.
Intelligent electronics
Jerk-free travel, smooth reversing and
precise positioning.
• Optimally adapted to any situation
using 5 individual work programmes.
• The monitoring of all components and
saving of service data, allowing fast and
low cost maintenance routines using
the diagnosis system.
• Standard display of the steering wheel
position and the travel speed.
T_EFG 316k/316/318k/318/320_012014_en_UK_000
Jungheinrich UK Ltd.
Head Oce:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone [phone]
Fax [phone]
[e-mail]
www.jungheinrich.co.uk
Jungheinrich fork lift
trucks meet European
safety requirements.
The German production
facilities in Norderstedt and
Moosburg are certified.