Owner manual

Benefit from the advantages
Drive and lift motor with 3-phase
AC technology
SOLO-PILOT MULTI-PILOT
Outstanding price/performance ratio
First-class design of operator seat, high
performance data and low life-cycle
costs give an outstanding price/perform-
ance ratio.
High residual capacity
Full rated capacity up to 4500 mm (EFG
115) or 5000 mm (EFG 110k/110/113)
can be achieved. This is due to excellent
stability safety.
Innovative motor technology
Drive and lift motor with AC technology
and excellent heat economics (no
ventilator required).
Performance enhancing workstation
• Standard comfort high roof for superior
headroom.
• Clear view: mast and fork carriage
allow for excellent visibility.
• Comfortable operation of direction and
hydraulics by SOLO-PILOT or MULTIPI-
LOT (optional).
• Low eort hydraulic power steering
(5,2 turns for 180º angle of lock).
Reduced maintenance
• Single-piece metal cover ensures quick
and easy access to the battery com-
partment.
• Maintenance and wear-free motors in
AC technology.
• Dirt, dampness and water-resistant
motors due to encapsulated design
and electronic components complying
to IP 54.
• Prolonged service intervals: only every
1000 operating hours or every 12
months.
• Hydraulic steering with fully encapsu-
lated cog-wheel system.
Economic driving and lifting
• AC technology ensures optimum per-
formance.
• Energy regeneration system.
• Omission of motor ventilators.
• Significantly prolonged work cycles,
increasing charging intervals.
• Progressive lowering brake valve allows
equal lowering speed with and without
load.
Innovative steering and safety tech-
nology
• Impulse ac technology steering allows
sensitive driving.
• Programmable performance parameter
ensure flexibility.
• 5 selectable drive programs (optional)
• Jungheinrich Curve Control reduces
speed depending on the steering angle
(optional).
SOLO-PILOT
The SOLO-PILOT (standard equipment)
combines the functions lifting/lowering,
direction switch and horn in one control
lever. The additional functions forward/
backward tilting, sideshift (optional) and
supplementary hydraulic (optional) can
be operated with addition levers situated
directly next to the SOLO-PILOT.
MULTI-PILOT
The MULTI-PILOT (optional) combines all
drive and hydraulic functions in one cen-
tral control lever. All control commands
can easily be selected without having
to move the hand. The hand rests easily
on the ergonomically optimised handle.
MULTI-PILOT even enables several hy-
draulic functions to be controlled at the
same time.
3-phase AC motors
Fully closed 3-phase AC motors –
brushless – are the main component of
the maintenance-free drive. They are
resistant to dust, dirt and damp. The
temperature control protects the motors
from overheating by constantly adjusting
the performance.
T_EFG 110/110k/113/115_012014_en_UK_000
Jungheinrich UK Ltd.
Head Oce:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone [phone]
Fax [phone]
[e-mail]
www.jungheinrich.co.uk
Jungheinrich fork lift
trucks meet European
safety requirements.
The German production
facilities in Norderstedt and
Moosburg are certified.