Owner's manual

In accordance with VDI Guideline 2198 this specification sheet provides details of the standard truck only. Non-standard tyres, different masts, optional equipment, etc. may
result in different values.
Technical data in line with VDI 2198
Issue: 05/2014
Identification
1.1 Manufacturer (short form) Jungheinrich
1.2 Model TFG 425 TFG 430 TFG 435
1.3 Drive LPG
1.4 Manual, pedestrian, stand-on, seated, order picker operation seat
1.5 Load capacity/rated load Q t 2.5 3 3.5
1.6 Load centre distance c mm 500
1.8 Load distance x mm 472 493 498
1.9 Wheelbase y mm 1650 1700 1780
Weights
2.1 Service weight kg 3640 4170 4550
2.2 Axle load, w. load, front / rear kg 5460 / 680 6370 / 800 7150 / 900
2.3 Axle load, w.o. load, front / rear kg 1490 / 2150 1630 / 2540 1700 / 2850
Wheels / chassis
3.1 Tyres LUFT
3.2 Tyre size, at front mm 7.00-12 27x10-12 27x10-12
3.3 Tyre size, at rear mm 6.00x9 6.50x10 6.50x10
3.5 Wheels, number front/rear (× = driven wheels) 2x/2
3.6 Track width, front b
10
mm 990 1034 1034
3.7 Track width, rear b
11
mm 940
Basic dimensions
4.1 Tilt of mast/fork carriage forward/backward α/β ° 6/8
4.2 Mast height (lowered) h
1
mm 2129 2122 2201
4.3 Free lift h
2
mm 150
4.4 Lift h
3
mm 2900
4.5 Extended mast height h
4
mm 3502 3659 3689
4.7 Height of overhead guard h
6
mm 2175 2180 2180
4.8 Seat height/stand height h
7
mm 1130 1135 1135
4.12 Coupling height h
10
mm 420 430 430
4.19 Overall length l
1
mm 3617 3768 3863
4.20 Length incl. back of forks l
2
mm 2567 2718 2813
4.21 Total width b
1
/b
2
mm 1192 1296 1296
4.22 Fork dimensions s/e/l mm 40 / 100 / 1050 45 / 125 / 1050 50 / 125 / 1050
4.23 Fork carriage ISO 2328, class/type A, B 2A 3A 3A
4.24 Fork carriage width b
3
mm 1120
4.31 Floor clearance with load under mast m
1
mm 106 104 131
4.32 Floor clearance centre wheelbase m
2
mm 141 155 153
4.33 Aisle width for pallets 1000 × 1200 sideways Ast mm 3987 4133 4248
4.34 Aisle width for pallets 800 × 1200 lengthways Ast mm 4187 4333 4448
4.35 Turning radius W
a
mm 2315 2440 2550
4.36 Smallest pivot point distance b
13
mm 720 730 750
Performance data
5.1 Travel speed, w. / w.o. load km/h 18 / 19
5.2 Lift speed, w. / w.o. load m/s 0.58 / 0.6 0.59 / 0.61 0.5 / 0.52
5.3 Lower speed, w. / w.o. load m/s 0.55 / 0.55
5.5 Drawbar pull w. / w.o. load N 17000
5.7 Gradeability laden/unladen % 23 / 27 20 / 26 17 / 24
5.9.2 Acceleration laden/unladen to 15 m S 5.7 / 5 6.2 / 5.4 6.5 / 5.6
5.10 Service brake hydraulic
5.11 Parking brake hydraulic
Combustion
engine
7.1 Engine manufacturer / type Kubota WG2503-L
7.2 Engine output according to ISO 1585 kW 36.5
7.3 Rated revolutions per minute /min 2200
7.4 No. of cylinders 4
7.4.1 Cubic capacity cm³ 2491
7.5.1 Fuel consumption acc. to VDI cycle kg/h 3.2 3.8 4.3
Misc.
8.1 Type of drive control hydrodynamic
8.2 Working pressure for attachments bar 210
8.3 Oil flow for attachments l/min 40
8.4 Sound pressure level at operator’s ear according to EN 12053 dB (A) 82
8.5 Trailer coupling, model/type DIN Bolzen
8.6 Steering hydraulic