Technical data

• Attach the radio with the frame to the insert. Ensure contact with the power
supply.
• Fasten radio to the supporting ring (3) with the enclosed plastic screws. Only
tighten the plastic screws lightly.
• Snap on covers (2).
i The aerial is integrated.
!
DANGER!
When connecting the loudspeakers or potential-free contact and power
supply wires to a shared device socket, the loudspeakers or potential-
free contact cables may come into contact with mains voltage.
The safety of the entire radio installation will be endangered.
People can also receive an electrical shock at devices that have been
disconnected.
Lay the loudspeaker or line out cables in separated device sockets in the
additional insulation sleeves.
6
A
B
L
1
N
Figure 4: Power supply connection
L,N AC 230 V~ connection
1 extension connection