Instruction Manual

This setting can be used with most heating systems without adaptation.
Changing the settings
￭ Press the control knob for longer than 20 seconds.
The LED flashes
green
for PWM control and
green/blue
for 2-point control.
￭ Press the control knob briefly: The control behaviour is changed.
￭ Press the control knob for longer than one second.
The current control behaviour is saved and the setting mode is exited automat-
ically.
After approx. 2 minutes without any operation the menu is exited without sav-
ing.
Setting the temperature limits
The temperature control has a setting range from 5 to 50 °C. The adjustment rings in
the central plate can be used to limit the temperature setting range.
Image4: Setting the temperature limit (before/after)
Floor thermostat
8 / 10
82404923 29.11.2022
J0082404923