Instructions / Assembly

24
Slot the bottom enclosure tube into the tubes in
the T-connector B tubes visible through the slots in
the frame pad.
Assemble the six remaining enclosure tubes
Assemble basketball back pole, Part P,
with a screw to basketball board, Part O.
Then, using Part Q to secure the basketball
hoop to the top of the enclosure pole, Part I.
Slow the basketball attached enclosure tubes
with hemisphere caps into the T-connector B
pn the the frame.
using the five self tapping screws and the
cross-head screwdriver.
completed step 5.
Then place the Hemisphere cap Part N onto
the top enclosure pole Part I.
Slot the remaining enclosure tubes with
hemisphere caps into the remaining
T-connector B’s on the frame.