Instructions / Assembly

20
STEP 3 : FITTING THE STITCHED BED
This step will require 2 people who must be
wearing gloves and protective eye wear.
Lay the stitched bed (with the V-Rings) part E
out inside the frame of the trampoline with the
warning labels facing upwards.
Locate the 7 V-Rings with the colored webbing.
These will be at 51º to each other.
Slot one of the springs part F onto one of the color
webbing V-Rings as shown.
Important: springs must be slotted on the right way
around.
Slot the other end of the spring into one of the
spring slots in the top of the frame.
IMPORTANT: Ensure the spring is fully
inserted into the slot on the top of the frame.
Colored
webbing