Instructions / Assembly

STEP 1 : ASSEMBLING THE FRAME
You will need the following parts to complete
section 1:
7 x Top Tubes with T-connector A - Part A
7 x Top Tubes with T-connector B - Part B
7 x Legs centers
- Part C
14 x Leg extensions
- Part D
First we will complete one of the four sections of
the trampoline frame.
Slot the narrow end of the top tube with
T-connector A into T-connector B.
Insert the leg extensions into the leg center.
Insert one of the leg extensions from the complete
leg into the T-connector.
A
B
Leg center
Leg extension
A
B
17
Top tube (with 4 top 3 under spring holes)
Top tube (with 4 top 3 under
spring holes)
There have Over and Under spring holes on top
tube. 4 top holes and 3 bottom holes.