User Manual

Deviation User Manual for Jumper T8SG, Release 5.0
79
The protocol has a Format option for the Blue-A, Green, DM007, Q282, JC3015-1, JC3015-2, MK33041 and
Q242 quadcopters.
10.34 Protocol: *CG023
The CG023 protocol supports the Eachine CG023 and 3D X4 quadcopters. It has not been tested on other
models. NOTE: This protocol requires the addition of an ‘NRF24L01’ hardware module to function. See the
following document for more information:
http://www.deviationtx.com/wiki/#hardware_modifications
The CG023 protocol supports 9 channels and only supports auto-binding.
The first four channels are Aileron, Elevator, Throttle and Rudder.
Channel 5 controls the LEDs.
Channel 6 controls Flip mode.
Channel 7 controls the still camera
Channel 8 controls the video camera.
10.32. Protocol: *BlueFly
Channel 9 controls headless mode.
The protocol has a Format option for the YD829 quadcopter.
10.35 Protocol: *H8_3D
The H8_3D protocol supports the Eachine H8 3D, JJRC H20 and H11D quadcopters. It has not been tested
on other models. NOTE: This protocol requires the addition of an ‘NRF24L01’ hardware module to function.
See the following document for more information:
http://www.deviationtx.com/wiki/#hardware_modifications
The H8_3D protocol supports 11 channels and only supports auto-binding.
The first four channels are Aileron, Elevator, Throttle and Rudder.
Channel 5 controls the LEDs.
Channel 6 controls Flip mode.
Channel 7 controls the still camera
Channel 8 controls the video camera.
Channel 9 controls headless mode.
Channel 10 controls RTH mode.
Channel 11 controls camera gimball on H11D and has 3 positions.