User Manual

Deviation User Manual for Jumper T8SG, Release 5.0
54 Chapter 9. Model menu
9.8 Standard GUI Menu items
The Standard GUI is an alternative interface from the Advanced GUI’. Which interface is used is chosen by
the ‘Mixer GUI’ setting in section Model setup (Std & Adv GUI). The Standard GUI is only available for
Helicopter-type models at this time. The pages of the Standard GUI are as follows:
1. Model setup: Model configuration page (See section Model setup (Std & Adv GUI))
2. Reverse: Servo reverse
3. D/R & Exp: Dual-rates setup
4. Subtrim: Servo sub-trim
5. Travel adjust: Servo travel-adjust