User Manual

Deviation User Manual for Jumper T8SG, Release 5.0
52 Chapter 9. Model menu
Select the object type from the spin-box on the left, then press ‘Add’ to create the object. This will add the
relevant object type to the relevant section in the menu with a type of ‘None’ (where applicable). Then
move the cursor to the newly created object and configure as desired.
9.7.3 Loading Objects
You can ‘Load’ alternate templates, to change the main page layout.
If you select ‘Default’ the layout will be set to the standard layout as shown in section Main Page.
Selecting ‘Empty’ will clear all objects. You may start from scratch.
If you want to use a layout from another model select the model whose layout you wish to use. The object
positions (see Configuring object position) will be transferred when selecting from an existing template or
model. Templates based on existing models have an (M) designation within the file list.
Additionally these templates can be created in the emulator or downloaded from the forums or even done
by manual edit of the modelxx.ini file.
9.7.4 Configuring Objects
• Box: Select timer, telemetry, channel, or input from scroll-box
• Trim: Select trim channel from scroll-box
• Model: Not configurable
• Battery: Not configurable
• TxPower: Not configurable
• Bargraph: Select channel from scroll box
• Toggle: Select channel or input from scroll-box. Press related ‘Toggle’ button to choose icon
• Menu: Choose page to display for each of 4 quick-page slots
You can delete any object but a Menu page by selecting the ‘Delete’ option and pressing the ‘ENT’ button.