User Manual

Deviation User Manual for Jumper T8SG, Release 5.0

main page config page is used to configure the main-page display. This page allows definition of which

elements are shown on the main page.

The following types of objects can be displayed:

• Box: Display a numeric value. Values can be timers, channel values, stick inputs, etc. There are two

types of boxes: big and small. The only difference is the size of the box and the text within it.

• Trimbar: Display a trim value. These generally are controlled by the trim switch and indicate what

the current trim position is. There are two types of trims. V-Trims show a vertical bar, and H-Trims

show a horizontal bar. After inserting all trims do have numbers only.

• Model (Icon): Display the icon related to the selected model.

• Battery: Display the battery voltage.

• TxPower: Displays the actual transmitter rating.

• Bargraph: Displays a vertical bar. The value of the bar is a channel output.

• Toggle: Show an icon indicating the state of a toggle switch. There can be 1, 2, or 3 icons defined for

a given toggle indicating different states depending on the switch position. Two-state switches can

have up to 2 icons. Three-state switches can have up to 3 icons.

• (Quick) Menus: Quick menus define quick-access pages that can be reached via a long UP/DN press.

9.7.1 Configuring object position

Note: This feature is not available for Devo7e.

Pressing and holding the ENT button from the model configuration page will switch to the object position

screen. Each of the visual objects can be selected using the UP/DN buttons. Pressing ENT again will allow

moving the placement of the selected object. The UP/DN/L/R buttons will move the selected object on

the screen. Press EXT once to exit move mode, and again to go back to the main page config menu.

9.7.2 Creating Objects

Note: This feature is not available for Devo7e.