User Manual

Deviation User Manual for Jumper T8SG, Release 5.0
46 Chapter 9. Model menu
9.5. Trims and Virtual Inputs (Std & Adv GUI)
The trim-step can be changed on the main screen. If you have to change the source also please use the
dialog accessed by pressing the respective ‘Input’ button. Here you may also add a switch to the trim. If a
switch is added to the trim, then it will have different trim values in each switch position.
9.6 Datalog (Std & Adv GUI)
Note: This feature is not available for Devo7e.
The Datalog feature allows storing a history of input or output positions as well as telemetry info over a
period of time. This can be used to examine and replay a flight as well as to visualize telemetry information
at a later time. Logs are persistent and Deviation will continue writing to the end of the previous log by
default.
• # bytes left: Indicates how many bytes can be written to the log before it is full.
• Enable: Input which enables logging.
• Reset: Clear the current log.
• Rate: How often to write current info to the log file.
• Select: Quickly set or reset which items are logged.
• Controls: Following ‘Select’ are a list of all controls which may be logged. They include timers, inputs,
outputs, and virtual channels, and Telemetry. The more items logged the faster the log will fill up.
Logging more information By default, the log can only store 16kB of data. You can increase the amount of
data to be stored by changing the datalog.bin file on the transmitter to a larger size. Deviation cannot
increase the size of this file, so its size indicates the maximum data that can be stored.