User Manual

Deviation
User Manual for Jumper T8SG, Release 5.0
42 Chapter 9. Model menu
For the Min/Max, Zero/Max, >0, <0, and ABSVAL, the controls allow setting the transition point along the x-
axis. A value of ‘0’ will be symmetric around the y-axis, positive or negative values will move the center point
accordingly
For the Expo curve, the controls allow independently configuring the shape of the curve for values greaterthan
or less-than zero.
For the Deadband curve, the controls allow independently configuring the deadband width for values
greaterthan or less-than zero.
For the Multi-point curves, each point can be individually set. Points are set by choosing the point number
and then choosing a value. The minimum number of points allowable is 3 the maximum number of points
is 13. Enabling ‘Smooth’ will apply a smoothing function rather than connecting points via straight lines.