User Manual

Deviation User Manual for Jumper T8SG, Release 5.0
9.2. Mixer (Adv GUI) 37
9.2.5 Expo & Dual-Rate Mix Type
Selecting a value for Switch1 or Switch2 will activate the corresponding section. Each section can either
have a ‘linked’ curve (curve is the same as the ‘High-Rate’ curve) in which case only the scalar can be
modified, or alternatively can have an independent curve definition. Pressing the ‘Mid-Rate’ or ‘Low-Rate’
button for a given switch will toggle between linked and independent curves.
A ‘Long-ENT’ press will update the current mixer settings, making it possible to test them on the transmitter.
Src: The input source controlling this mixer.