User Manual

Deviation User Manual for Jumper T8SG, Release 5.0
32 Chapter 9. Model menu
Bind/Re-Init: Depending on the protocol and Fixed-ID setting, the transmitter may bind with the model
9.1. Model setup (Std & Adv GUI)
on start-up, or may need to be manually bound once. See Protocols for more on specific protocols. If the
protocol does not support binding, the button will show ‘Re-Init’, which can be used to switch protocols
without power-cycling the transmitter.
Fixed ID: The Fixed ID sets a unique code to ensure that the transmitter will only bind to a specific model.
This is useful to ensure that the transmitter is not accidentally bound to the wrong model.
# Channels: Sets the number of channels to transmit (the maximum number of channels is dependent on
the selected protocol).
9.1.1 Predefined Model Templates
The Deviation firmware supports user-customizable predefined templates. By Selecting ‘Template...’
within the File spin-box from the Model page.
Additional templates can be added via USB to the ‘\template’ directory. A template does not completely
replace your existing model, but instead only a portion of it. The currently supported templates will replace
the mixer and trim definitions, but will not affect the display layout.