User Manual

Deviation User Manual for Jumper T8SG, Release 5.0
30 Chapter 9. Model menu
9.1. Model setup (Std & Adv GUI)
Mixer GUI: Defines which graphical user interface (GUI) to use for this model. The ‘Advanced’ GUI is the
default for Deviation. The ‘Standard’ GUI is only available for Helicopter models and more closely
resembles the stock GUI.
Standard mixer gui is designed for collective pitch helicopters with a flybar. It includes features spefic to
those that aren’t needed on other aircraft, and may be missing features needed to properly control other
aircraft. A flybarless collective pitch helicopter might benefit from some of the features of the standard
GUI, it doesn’t need them and may need those missing features. You are strongly encouraged to use
advanced mixer for all aircraft but collective pitch helicopters.
Note: If you switch from advanced mixer to standard mixer all data may be lost. Your data will be preserved
if you switch from standard mixer to advanced mixer.
Model Name: Set the model’s name. Use the left, right, up, and down buttons then ENT to select each
character.
Icon: Choose the model’s icon. Additional model icons can be installed (see USB & File-system).