User Manual

Deviation User Manual for Jumper T8SG, Release 5.0

CHAPTER 12

Emulator

The emulator provides a way to test Deviation on your PC without uploading the firmware to your

transmitter. It provides a visual display equivalent to that of the transmitter along with a side-screen

displaying the current virtual-stick/switch states as well as the Channel output that would be received by

the servos.

Download and unzip the deviation-emu_devoXX-vx.y.z.zip emulator package from:

http://www.deviationtx.com/downloads-new/category/1-deviation-releases/

where XX is the number of your Devention transmitter. x.y.z identifies the deviation version number.

Normally you should use the latest one. To start the emulator just run the exe file in the sub-directory.

The emulator controls are as follows (based an an English QWERTY keyboard):

Keyboard

Function

Transmitter

12e

q/a

Left-Vertical stick (Throttle in mode 2)

Q/A

Left-Vertical trim

stick/switch