User Manual

The T12, when equipped with the Jumper JP4-in-1 module, is cable of operating under many different
protocols. To view the most up to date list of compatible protocols please visit https://www.jumper.xyz.
Please note, new protocols are being added to the software all the time. Some protocols may require the upgrading of your
firmware.
Model Selection. Protocol Selection.
1. Press the Menu button and select the Model 2. Press the Page button to enter model setup then
memory slot you wish to use. Navigate to the EXTERNAL RF options and under Mode select MULT
3. Move the cursor to the second part of Mode 4. Different protocols will have different Binding sequences. Please
and select the Protocol you wish to use then press pay attention to Subtype and select the correct type for your model
enter to lock in the selection. or receiver. Follow Model or receiver manufactures binding steps.