User Manual

1: Antenna (if equipped with RF Module)
2: Handle
3: SWC three-segment switch
4: SWH two-segment switch
5: SWA three-segment switch
6: AUX5 knob
7: RF indicator
8: Throttle / Aileron
9: Power switch
10: Digital trim key
11: Digital trim key
12: Menu direction key
13: Display Screen
14: Exit key
15: Confirm key
16: Digital trim key
17: Digital trim key
18: Direction / Tilt Joystick
19: Power Indicator
20: AUX4 Knob
21: SWD three-segment switch
22: SWG two-segment switch
23: SWB three-segment switch
24: Loud Speaker Bay
25: Battery Bay
26: TF Memory card slot
27: JR/FrSKY Module (included with T12+JP4-in-1 combo only
The T12 comes with a 4 x AA Battery tray (Batteries not included). Alkaline, Nicad or NiMH batteries are suitable for use in
this radio. If Using Alkaline batteries, it is recommended to remove the batteries if the radio will not be used frequently or
for any length of time to avoid any corrosion damage from leaking batteries.
Alternatively the T12 can be powered by a LiPO or LiFE battery via the batteries JST-XH Balance lead. The T12 can work on
voltages 4.5v to 18v however for ease of use a 2s 7.4v Lipo is recommended.