User Manual
6 Technical data
23
Electrical data
6.1 Setup program
The program and the interface with adapter are available as accessories and offer the following advantages:
- simple and convenient parameterization and archiving via PC
- simple duplicating of parameters on instruments of the same type
- possibility of entering a linearization table
Minimum hardware and software requirements:
- PC Pentium 100 or compatible
- 128 MB RAM, 16 MB free on hard disk
-CD-ROM drive
- free COM interface
- Microsoft Windows 98/ME/NT4.0/2000/XP
h Link PC interface to the RS232 interface on the PC
h Insert black adapter (3 pins) into instrument from below
Data backup EEPROM
Connection
screw terminals for wire cross-sections up to 4 mm
2
solid wire
and up to 2.5 mm
2
stranded wire
Electromagnetic compatibility
interference emission
immunity to interference
EN 61326
Class B
to industrial requirements
Operating conditions The instrument is designed as a panel-mounting unit.
Electrical safety EN 61 010, Part 1, overvoltage category III, pollution degree 2
Accuracy of timer 2.5 min/month, temperature error 10ppm/10°C