User Manual

6 Technical data
20
6 Technical data
Meas. input Designation Meas. range Meas. accuracy
1
/
ambient tempera- ture error
Recognition of ... Probe short- circuit
Probe break
Resistance thermometer
Pt100 EN 60 751 -200 to +600°C 0.1%/ ≤100ppm/°C yes yes Pt1000 EN 60 751 -200 to +600°C 0.1%/ ≤100ppm/°C yes yes KTY2X-6 (PTC) -50 to +150 °C 1%/ ≤100ppm/°C yes yes resistance 0 — 3000 Ω customer table
3
0.1%/ ≤100ppm/°C
3
= 0Ω yes
Measuring current with Pt100: 0.2 mA, with Pt1000, KTY2X-6 or resistance: 0.02 mA Lead compensation is adjustable via the parameter Lead compensation resistance The total resistance (sensor+lead) must not exceed 320Ω for Pt100 and 3200Ω for Pt1000, KTY2X-6 or resistance. Thermo- couple
Fe-Con J EN 60 584 -200 to +999 °C 0.4%/ ≤100ppm/°C
2
no yes
Fe-Con L DIN 43 710 -200 to +900 °C 0.4%/ ≤100ppm/°C
2
no yes
NiCr-Ni K EN 60 584 -200 to +999 °C 0.4%/ ≤100ppm/°C
2
no yes
-10 to 60 mV customer table
3
0.1%/ ≤100ppm/°C
3
no yes
For the voltage input (-10 to 60 mV), terminal temperature compensation for thermocouples can be used. Internal terminal temperature compensation can be switched off through the setup program (0°C).