User Manual

4 Commissioning the instrument
14
Response after power-on 0, 1
Enabling the start-stop key 0: inhibited 2: acknowledgement for relay 2 (K2) 1: enabled 3: start/stop enabled and acknowledgement relay 2
0, 1, 2, 3
Function of relay K2 No function: 0 Signal alarm message: 1 = relay is to pull in, 2 = relay is to drop out Output timer message : 3 = relay is to pull in, 4 = relay is to drop out Service interval elapsed: 5 = relay is to pull in / 6 = relay is to drop out
0 ...
6
Parameter Meaning
Value range from...factory-set...to
Cooling contrl. Heating contrl.
0 Defrosting Heating OFF 1 Cooling Heating