User Manual

4 Commissioning the instrument
7
4.2 Setting the instrument functions (parameter level) The instrument functions and values are set at the parameter level. h Press for 3 seconds and will appear alternately. h Set code 72 for accessing the parameter level by using the and keys.
The longer the key is pressed, the faster the value will change.
h Acknowledge with ,
parameter name and value appear alternately, e.g. .
h Set value within the specified value range by using the and keys. h Acknowledge settings with . h Set next parameter, see Overview of operation on the first inside page.
H
Time-out If no key is pressed for 60 seconds, the instrument automatically switches back to process value display, see Overview of operation on the first inside page.
H
Switching parameters out of display: The table below lists all the parameters for each instrument type. Depending on the type designation on the nameplate, parameters which are not required can be hidden.