User Manual

1 Identifying the instrument

(1) Basic version

701050/ JUMO ecoTRON T

8 factory-set, configurable

9 customized configuration

(2) Measurement input

Pt100 in 2-wire circuit

Pt1000 in 2-wire circuit

KTY2X-6

2Fe-Con J

Fe-Con L

NiCr-Ni K

30(4)—20 mA

40—10 V

1 relay, changeover 10A 230V

(3) Supply

230V AC +10/-15% 48 — 63Hz

115V AC +10/-15% 48 — 63Hz

12 — 24V DC +15/-15% /

24V AC +15/-15%, 48 — 63Hz

factory-set

Included in delivery:

1 Operating Instructions 70.1050.0

The nameplate with the order code is affixed to the side

of the instrument. The supply voltage connected must

correspond to the voltage specified on the nameplate.

All necessary settings are described in these

Operation Instructions. However, if any difficul-

ties should still arise during start-up, you are

asked not to carry out any unauthorized manip-

ulations on the unit. This could endanger your

rights under the instrument warranty! Please

contact the nearest subsidiary or the head office

in such a case.

Please read these operating instructions before

commissioning the instrument. Keep the manual

in a place that is accessible to all users at all

times. Please assist us to improve these operat-

ing instructions, where necessary.