Datasheet

2010-06-17/00485235
Data sheet 60.3070 Page 3/15
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14,
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow - Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
8 Technology Boulevard
Canastota, NY 13032, USA
Phone: 315-697-JUMO
1-800-554-JUMO
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.us
Technical Data
Case
Electrical data
Design 5 + 6 Design 7 + 8
Case Housing bottom section: PA (inforced)
Color: Silver gray RAL 7001 (for TZ 061 black)
Case lid: ABS with inspection window (PMMA)
Color: cobalt blue RAL 5013 (for TZ 061 light gray,
RAL 7035)
Set point value setting
TR The switching point can be externally adjusted by
means of the rotary knob
- -
TW, STW, STB, ATW The switching point can be adjusted by means of a
screwdriver once the case lid has been removed,
check the set switching point through the inspection
glass.
Switching point can adjusted by means of a screw-
driver
Protection type IP 54 as per EN 60 529 IP 20 as per EN 60 529
Cable inlet Cable screw connection M20 x 1.5,
for cable ∅ 6-12 mm
Cable connection directly on terminals
Long-distance line ∅ 1.5 mm - min. bending radius of the long-distance line 5 mm - material: Copper (Cu) or stainless steel (CrNi,
1.4301)
Case fastening Pipe mounting with clamping belt for pipe diameter
15-100 mm, sheath mounting, wall mounting
Wall mounting, top hat rail installation TH35 as per
DIN EN 60715
Weight approx. 0.2 kg
Electric contact Snap switch with single-pole change-over contact
Contact rating TR / TW / STW / ATW STB
On the N/C contact (Contact deck 1-2):
AC 230 V +10%, 16 (2.5) A, cos ϕ = 1 (0.6),
DC 230 V +10%, 0.25 A
On the N/C contact (Contact deck 1-2):
AC 230 V +10%, 16 (2.5) A, cos ϕ = 1 (0.6),
DC 230 V +10%, 0.25 A
On the N/O contact (Contact deck 1-4):
AC 230 V +10%, 6,3 (2.5) A, cos ϕ = 1 (0.6),
DC 230 V +10%, 0.25 A
On the signal contact (Contact deck 1-4):
AC 230 V +10%, 2 (04) A, cos ϕ = 1 (0.6),
DC 230 V +10%, 0.25 A
Electrical connection contact (plug-type terminal)
„Push-In
®
“-terminal technology: patented connection technology of Weidmüller GmbH & Co. KG, Detmold
Connection cross section 0.75...2.5 mm
2
fine wired (single-wire, fine wired with ferrule)
Switching reliability To ensure a high switching reliability, we recommend a minimum load of:
AC / DC = 24 V, 100 mA with silver contacts
AC / DC = 10 V, 5 mA with gold-plated contacts (TZ 702)