Manual

2012-08-23/00073280
Data Sheet 608201
Page 7/8
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: [phone]
1-800-554-5866
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumousa.com
Order details
Dial thermometer Class 1.5, Type 608201
Order code
(4) Capillary type (FL)
1
00 none (with rigid connection)
02 FL02 copper capillary with copper braiding, approx. 2.5 mm dia. (up to +300°C top of indication range)
11 FL11 copper capillary with PE sleeve, approx. 3.5 mm dia. (up to +120°C top of indication range)
17 FL17 stainless steel capillary, 1.5 mm dia.
21 FL21 copper capillary, 1.0 mm dia. (up to +300°C top of indication range)
(5) Capillary length
1
0 none (with rigid connection)
1000 1000 mm
2000 2000 mm
3000 3000 mm
4000 4000 mm
5000 5000 mm
. . . . special length (specify in plain text: 1000 mm steps, maximum length 10000 mm)
(6) Process connection (PA)
1
750 TF 01; temperature probe with stepped support tube
752 TF 11; temperature probe without support tube
843 TA 02; immersion tube with union nut and loose nipple
2
161 TA 03; immersion tube with loose union nut
847 TA 06; sliding clamp fitting on support tube
2
311 TA 20; immersion tube with loose nipple and shoulder
2
872 TA 21; immersion tube with loose plug and conical seal
873 TA 22; immersion tube with loose plug, conical seal and loose nipple
2
401 TA 23; immersion tube with plug and spring clip
848 TA 25; sliding clamp fitting on capillary
2
SH 09; (with FL 17 and FL 21 only)
913 SH 07; screw-in pocket, assembled, with clamping clip and fixing screw
2
SH 09; (with TF 01)
820 SH 09; screw-in pocket, assembled, with clamping clip and fixing screw
SH 09; (not with FL21 - welding shoulder with steel 1.4515) (with TF 01)
876 SH10; screw-in pocket, assembled
2
871 SH11; screw-in pocket, assembled
2
(7) Diameter of process connection (PA)
1
6 06 mm dia.
8 08 mm dia.
10 10 mm dia.
11 11 mm dia.
12 12 mm dia.
1
See Data Sheet 608730 for description and features
2
Screw-in spigot to DIN 3852 Form A.
3
List extra codes in sequence,
separated by commas.