Operating Manual Owner manual

7 Configuration level
27
2014-06-12
7.8 C118 Display switch-off after timeout
7.9 C119 Warning alarm function
The warning alarm is indicated via LED KV and is output simultaneously at the binary output. The switching action can be
configured as an absolute value or as an interval to the limit value (relative).
k Factory setting
Display switch off Comment
0 inactive Display is permanently switched on.
1 active Display switches off after a timeout and re-appears,
as soon as a key is pressed.
Warning alarm function Comment
0 inactive Warning alarm and LED KV switched off.
1 absolute value Warning alarm limit fixed.
2 Interval from the limit value The warning alarm limit varies with the value of the limit set for switching
off the relay.