Manual

6 Electrical connection
24
Depending on the configured status display, the functions below are signaled.
The priority of the signaling has the output 1 (OUT1).
WARNING!
Risk of injury and material damage due to faulty system states
When filling the container, the tank, or the pipe, uncontrolled system states may be triggered and result
in injuries and material damage.
X The plant must be in an error-free state.
X Check that the output signal is functioning as intended.
Status display according to NE107 Description
Green, lit up continuously Supply and operation, device is ready for operation
Blue, lit up continuously Maintenance required, e.g. clean PEEK tip
Yellow, lit up continuously Device is covered by liquid
Red, flashing Outside the specification or functional check, error can be
remedied, e.g. temperature range exceeded or incorrect wir-
ing
Red, lit up continuously Malfunction and/or device failure, error cannot be remedied,
e.g. electronic damage
Status display according to IO-Link Description
Green, lit up continuously Device is ready for operation, SIO mode
Green, flashing 10111011101110
a
a
1 = 900 ms lit up, 0 = 100 ms off
Active communication
Green, flashing 0101010001010
a
Device search (identification of the device)
Yellow, lit up continuously Device is covered by liquid, output 1 switched
Red, lit up continuously Malfunction and/or device failure