Datasheet

2011-04-21/00540116
Data Sheet 701150 Page 2/13
JUMO GmbH & Co. KG
Delivery address:Mackenrodtstraße 14,
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
8 Technology Boulevard
Canastota, NY 13031, USA
Phone: 315-697-JUMO
1-800-554-JUMO
Fax: [phone]
e-mail: [e-mail]
Internet: www.jumo.us
Technical data
Analog inputs
RTD temperature probe
Thermocouples
Direct current
Analog output
Designation Measuring range Accuracy
2/3-wire circuit
1
Ambient temperature error
Pt 100 DIN EN 60751 -200 to +850 °C 0.5% / 0.1% 50 ppm
Pt 1000 DIN EN 60751 -200 to +850 °C 0.5% / 0.1% 50 ppm
Connection type 2-wire, 3-wire circuit Maximum output resistance 30 
Measuring rate 210 ms
Error tolerance time  5s time taken into account for all diagnosis tests
Input filter digital filter, 2nd priority; filter constant can be set from 0 to 100 s
Special features Individual probe Pt100 2-wire,
display can also be programmed in °F
Designation Measuring range Accuracy
1
Ambient temperature error
Fe-CuNi „L“ DIN 43710 -200 to +900 °C 0.4% 100 ppm
Fe-CuNi „J“ DIN EN 60584 -200 to +1200 °C 0.4% 100 ppm
Cu-CuNi „U“ DIN 43710 -200 to +600 °C 0.4% 100 ppm
Cu-CuNi „T“ DIN EN 60584 -200 to +400 °C 0.4% 100 ppm
NiCr-Ni „K“ DIN EN 60584 -200 to +1372 °C 0.4% 100 ppm
NiCrSi-NiSi „N“ DIN EN 60584 -100 to +1300 °C 0.4% 100 ppm
Pt10Rh-Pt „S“ DIN EN 60584 0 to +1768 °C 0.4% 100 ppm
Pt13Rh-Pt „R“ DIN EN 60584 0 to +1768 °C 0.4% 100 ppm
Pt30Rh-Pt6Rh „B“DIN EN 60584 300 to 1820 °C 0.4% 100 ppm
W3Re-W25Re „D“ 0 ... 2495°C 0.4% 100 ppm
Cold junction Pt 100 internal
Cold junction accuracy ± 1 K
Measuring rate 210 ms
Error tolerance time  5s time taken into account for all diagnosis tests
Input filter digital filter, 2st priority; filter constant can be set from 0 to 100 s
1. The accuracy values refer to the maximum measuring range.
Measuring range Accuracy Ambient temperature error
4 to 20 mA, voltage drop < 2 V 0.2% 150 ppm
Scaling can be freely programmed within the limits
Measuring rate 210 ms
Error tolerance time  5s time taken into account for all diagnosis tests
Input filter digital filter, 2st priority; filter constant can be set from 0 to 100 s
Special features Individual probe 4 to 20mA
Type of signal Accuracy Residual ripple Load influence Temperature error Load resistance
Current 4 ... 20 mA
 0.5 % ± 0.5 % bei 300  ± 0.05 mA/100 150 ppm / °C  500 
0 ... 20 mA
Voltage 2 ... 10 V
 0.5 % ± 0.5 % ± 15 mV 150 ppm / °C 500
0 ... 10 V