Datasheet

Page 2/8Data Sheet 40.1002
2010-05-20/00544548
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14,
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow - Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
8 Technology Boulevard
Canastota, NY 13032, USA
Phone: 315-697-JUMO
1-800-554-JUMO
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.us
Technical data
General information
Measuring range
a
All pressure transmitters are vacuum-proof
Output
a
Additional outputs are available on request.
Mechanical properties
Reference conditions DIN 16086 and DIN EN 60770
Sensor
Principle of measurement
Permissible load change
Thick film on ceramic body (piezoresistive)
> 10 million, 0 to 100 % measurement range
Location
Mounting location
Calibration location
Any
Device standing vertically, process connection on bottom
Relative pressure The measurement ranges start at 0 bar
Measuring range 1.6 2.5 4 6 10 16 25 40 60 bar
Overload capacity
a
6 6 1212205050120120bar
Bursting pressure 12 12 25 25 38 75 75 200 200 bar
Relative pressure
Measuring range -1 to 0.6 -1 to 1.5 -1 to 3 -1 to 5 -1 to 9 -1 to 15 -1 to 24 bar
Overload capacity
a
6 6 1212205050 bar
Bursting pressure 12 12 25 25 38 75 75 bar
Analog output
a
Electrical current
Output 405
Voltage
Output 412
Output 415
Output 418
Output 420
4 to 20 mA, 2 wires
DC 0.5 to 4.5 V, 3 wires, ratiometric 10 to 90% of the supply voltage
DC0to10V, 3 wires
DC 1 to 5 V, 3 wires
DC1 to 6 V, 3 wires
Step response time
T
90
≤ 2ms
Burden
Electrical current
4to20mA, 2 wires
Voltage
DC 0.5 to 4.5 V, 3 wires
DC0to10V, 3 wires
DC 1 to 5 V, 3 wires
DC 1 to 6 V, 3 wires
R
L
≤ (U
B
- 8 V) / 0.02 A (Ω)
R
L
≥ 5kΩ
R
L
≥ 10 kΩ
R
L
≥ 10 kΩ
R
L
≥ 10 kΩ
Process connection
Material
For plug connection, process connection 383
Stainless steel 304
Nickel-plated brass
Process seal
Internal material
a
Seal 600
Seal 601
Seal 602
Seal 604
Seal 609
External material
a
for G1/4, Process connection 521
EPDM
FPM, standard
CR
FFPM
NBR
FPM