Datasheet

V1.00/EN/00442069
Data Sheet 703041JUMO GmbH & Co. KG ˘ 36035 Fulda, Germany Page 6/10
Interface
DIN approved sensors for operation in air
DIN approved sensors for operation in water and oill
Approvals/marks of conformity
Modbus
Interface type RS422/485
Protocol Modbus, Modbus Integer
Baud rate 9600, 19200, 38400
Device address 0 — 255
Max. number of nodes 32
PROFIBUS
Device address 0 — 255
Sensor type Temperature range
1
1. This is the sensor temperature range. The approval of the device does only apply to the temperature ranges listed on page 4/10.
Nom. length mm Process connection
Resistance thermometers
acc. to data sheet 90.2006
2 x Pt 100 -170 ... +700°C 500, 700, 1000 Sliding stop flange
2 x Pt 100 -170 ... +700°C 500, 700, 1000 Screwed pipe joint G1/2
Thermocouples
acc. to data sheet 90.1006
2 x NiCr-Ni, type „K“ -35 ... +800°C 500, 700, 1000 Sliding stop flange
2 x FeCuNi, type „L“ -35 ... +700°C 500, 700, 1000
2 x NiCr-Ni, type „K“ -35 ... +1000°C 250, 355, 500
1 x Pt10Rh-Pt, type „S“ 0 ... 1300°C 250, 355, 500
2 x Pt10Rh-Pt, type „S“ 0 ... 1300°C 250, 355, 500
1 x Pt30Rh-Pt6Rh, type „B“ 600 ... 1500°C 250, 355, 500
2 x Pt30Rh-Pt6Rh, type „B“ 600 ... 1500°C 250, 355, 500
Sensor type Temperatur range
1
1. This is the sensor temperature range. The approval of the device does only apply to the temperature ranges listed on page 4/10.
Fitting length mm Process connection
Resistance thermometers
acc. to data sheet 90.2006
1 x Pt 100 -40 ... +400°C 100 Screw fitting G1/2
2 x Pt 100 100
2 x Pt 100 -170 ... +550°C 65 ... 670 Screwed pipe joint G1/2
1 x Pt 100 65 ... 670
1 x Pt 100 -170 ... +480°C 250 Screw fitting G1/2
2 x Pt 100 250
1 x Pt 100 -40 ... +480°C 100, 160, 220 Weld-in pocket
1 x Pt 100 -40 ... +400°C 190
2 x Pt 100 -40 ... +400°C 190
2 x Pt 100 -40 ... +480°C 100, 160, 220
3 x Pt 100 -40 ... +400°C 100, 160, 220
1 x Pt 100 -170 ... +480°C 100, 160, 220
Thermocouples
acc. to data sheet 90.1006
2 x NiCr-Ni, type „K“ -35 ... +550°C 65 ... 670 Screwed pipe joint G1/2
1 x NiCr-Ni, type „K“ 65 ... 670
2 x FeCuNi, type „L“ 65 ... 670
1 x FeCuNi, type „L“ 65 ... 670
1 x Fe-CuNi, type „L“ -35 ... +480°C 220 Weld-in pocket
2 x Fe-CuNi, type „L“ 220
Mark of
conformity
Testing laboratory Certificates/certification
numbers
Tes t b as i s va l id f o r
DIN DIN CERTCO Register No. TR1187 DIN EN 14597 all types
DNV GL DNV GL TAA00001B3 Class Guideline
DNVGL-CG-0339
703044/191-320-23/214, 062
c UL us Underwriters Laboratories E 201387 UL 61010-1
CAN/CSA-C22.2 No. 61010-1
all types