Use and Care Guide

2
NOTE: The panels can be configured in two distinct ways, as pictured below. The way you need to
set up the barrier is dependent on on the size of the car.
Assembly
1. Check the distance between the main panel and the headrest bar on the
front seat. Determine whether the small or large hooks are needed to
securely attach the barrier.
2. Insert the desired hooks into the hook attachment bases. Pull out the knob
until the hook is at the desired length. Then turn it counterclockwise
several times until the hook is securely and firmly in place.
3. Position the main panel behind the front seat so that the overlapping bars face the back seat as
seen below.
4. Slip the assembled hooks through the bars
and latch onto the headrest bars of the
front seats. Tighten the hook attachment
bases until the hooks are tightly and
securely on the headrest bars.
Do not overtighten or the hook will lose
its shape.