User Instructions

24
Battery display on SERVO-DRIVE
switch flashes red.
Battery display lights up red
SERVO-DRIVE for AVENTOS
does not open or close com-
pletely.
SERVO-DRIVE for AVENTOS
does not work on one particu-
lar lift system when pressing
on the front or using the
SERVO-DRIVE switch.
SERVO-DRIVE for AVENTOS
does not close completely.
[OK] button of drive unit lights
up red continuously
SERVO-DRIVE switch battery
is losing power.
Battery has been inserted
incorrectly.
The front is not balanced or
does not lie flat on the cabinet
evenly.
The front is not balanced.Lift mechanism adjustment
display lights up.
SERVO-DRIVE switch battery
has run out of power.
Battery was inserted incor-
rectly.
SERVO-DRIVE switch is
defective.
Drive unit is defective.
Cabling is defective.
An object is between the lift
system and cabinet or jammed
between the lever and front.
An object juts out over the front
edge of the cabinet.
Drive unit is defective
Replace the battery.
Insert the battery correctly.
Contact your distributor's
customer service to readjust
the front.
Replace the battery.
Insert the battery correctly.
Contact your distributor's
customer service to replace
the SERVO-DRIVE switch.
Contact your distributor's
customer service to replace
the drive unit.
Contact your dealer's custo-
mer service to correct the
problem.
Remove the obstruction.
Remove the obstruction.
Replace drive unit
Problems Possible cause Remedy